How To Fix Xbox One Controller Right Bumper

If you're looking for how to fix a cleaved bumper on your Xbox I controller, you're not lone.

I of the more common pieces that break on the Xbox Ane controller is the left (LB) and right (RB) bumpers.

Read More: how to gear up xbox i controller bumper

These bumpers are used heavily on the controller and are not meant for extended vesture and tear that a lot of gamers put on them.

Read on to acquire more about how you can fix your broken Xbox One controller bumpers.

Why do the LB/RB bumpers pause on an Xbox One controller?

Root Cause of Broken Bumper LB RB on Xbox One Controller

You may notice that your left bumper or right bumper isn't as responsive every bit it once was, or that your Xbox Ane controller bumper isn't working at all.

In some cases, your Xbox One controller bumpers might even be stuck or jammed.

There are a few different causes of a broken lb/rb controller bumper, but chances are this is due to a fracture in the plastic arm that connects the bumper to the push button that it engages on the Xbox I controller excursion board.

This piece can break and render the bumper useless.

This part can exist replaced or repaired to fix your bumper.

Step 1 – Open the Xbox Controller Beat out

Information technology's impossible to fix a cleaved bumper without opening your controller.

Useful for You lot: How to Set Invalid Partition Tabular array Mistake in Windows x?[4 Ways]

Sometimes, y'all can fix information technology with only opening the outer shell of the controller, but more than ofttimes than not yous'll demand to have a few more pieces off.

You tin watch XboxDIY's videos on How to Open up an Xbox Ane Controller and How to Reassemble an Xbox 1 Controller:

How to Open an Xbox One Controller
How to Reassemble an Xbox I Controller

Step ii – Repair or Replace the Broken LB/RB Bumper

There are two potential means to fix an Xbox Ane Bumper when it breaks.

Depending on the condition of your bumper, y'all can either try to repair the bumper past gluing it back together or, but supplant the bumpers.

Selection i – Super Mucilage Bumper Back Together

The easiest way to gear up a broken bumper on your Xbox One controller is by super gluing the broken slice back together.

Most often, the broken piece is not damaged and it can be glued back together.

In some cases, where the bumper has shattered or the broken piece is missing, you may demand to skip ahead in the commodity and learn how to replace the bumpers on your Xbox One controller.

What You lot Need to Glue Your Bumper

Plastic Trim Tool
Torx Screwdriver Set
Super Glue

In our experience, brute force unremarkably snaps the arm that connects the bumper to the circuit lath. The design is poor, and newer Xbox Ane controllers have a improve and more durable design.

You'll demand to re-glue the piece together using superglue, being careful to make sure it lines up properly and sits flush confronting the role of the cleaved bumper.

If these parts are severely damaged or don't sit affluent – you'll need to buy a new fix of Xbox Ane controller bumpers and swap them out.

Useful for You: Fixing Slippery Stamped
Concrete Most Pools

Use a small dab of superglue, making sure that the sides of the ii snapped pieces are clear of any residual gum – the area where the bumpers sit in the controllers is tight, and whatsoever additional mass could interfere with how the bumper works.

If you're not precise in re-gluing the piece, the cleaved plastic arm on the bumper won't be able to generate the force needed to appoint the button on the circuit board. This might piece of work, simply it is non very satisfactory.

Option 2 – Supercede the Broken Bumpers with New Parts

Yous can very easily fix your broken Xbox Ane controller bumpers past ownership new ones and swapping them out.

Not only is this easier and more than reliable than trying to fix your cleaved bumpers, simply information technology besides allows you to customize your controller with new colors and designs.

You could even paint your Xbox One controller buttons while you're at it.

What Yous Demand to Supersede Xbox I Controller Bumper

Plastic Trim Tool
Torx Screwdriver Set
Replacement Xbox One Controller Bumpers (LB/RB)

Y'all'll need to open your Xbox One controller, as with nigh Xbox One controller repairs, and swap the bad bumper out with a new 1.

We recommend making sure the replacement bumpers you order are the right buttons for your Xbox One controller model, as multiple new models have go available since writing this commodity.

Wikipedia – Xbox One Controller Models and Other Information

Pro Tips and Tricks

Be careful with super glue. There is a reason it is called Super Glue!
Don't put as well much glue on the broken bumper piece equally this may forbid the piece from plumbing fixtures back into the controller
Brand sure the super mucilage has enough of time to dry out (10-15 minutes after you lot hold the slice together)
If you're looking to get a new color controller, this is a great fourth dimension to practice it. We even have an commodity on How to Paint Your Xbox One Controller.
You tin can test to run into if your bumper is working by putting on the circuit lath with the LB and RB bumpers and the front of the trounce. Clip-on the bumper and you should be good to go!

Were you able to repair your broken or damaged Xbox One controller bumper?

We hope that our article on how to repair or replace your broken bumper was useful and that your controller is back up and running.

If you have any questions, experience costless to drop them in the comment section below or visit our Contact page.

Practise you have any tips, tricks, or suggestions for others who are trying to fix their broken Xbox One controller bumper? We would honey to hear from yous in the comments below!

Top Useful: Here's How to Fix A Bent Phone