How To Fix Code P0203

P0203 code definition

P0203 is a full general OBD2 code that points to a fault in the injector circuit.

Annotation: This code is similar to P0200, P0201, P0202, or P0204-P0212. Misfire codes and rich / lean codes may be seen in improver to P0203.

What the P0203 code ways

The P0203 is a diagnostic problem lawmaking that is ready when the engine control module (ECM) has detected a mistake in the injector circuit for cylinder three. The ECM looks for a specific range of voltage and resistance from each injector circuit and when the results are found to be out-of-range, a diagnostic trouble code (DTC) will exist set.

Once the DTC is prepare, the automobile will enable a failsafe manner which prevents further impairment to the vehicle. When a failsafe mode is set, information technology will remain until normal functioning is detected or is repaired.

What causes the P0203 code?

An ECM that is faulty
Injector failing or failed in cylinder iii
Open or curt plant in the wiring harness
Electric connection that is poor

What are the symptoms of the P0203 code?

Symptoms vary from vehicle to vehicle only the constant is the Check Engine Light existence illuminated once the fault is found. Other symptoms that may occur include:

Poor fuel mileage
Running poorly
Engine dying while running
Lean or rich conditions
Engine misfires

How does a mechanic diagnose the P0203 code?

In all cases, the first step volition exist to check what codes present in the vehicle. A qualified technician will begin by installing an avant-garde scan tool and seeing what codes are found. Once the codes are establish, the freeze frame data will be checked for what the vehicle was doing when the lawmaking was set. All codes volition be cleared and taken for a test bulldoze to verify the fault. When the error is verified, a visual inspection will exist performed on the injector circuit and the injector to expect for whatever damage.

Next, the voltage will be checked at the injector itself. The scan tool will then be used to monitor injector operation. If all of this passes, a noid light volition be installed into the wiring of the cylinder 3 injector to check for the proper voltage pulse.

Lastly, the ECM will be tested according to the manufacturer'due south specifications.

Common mistakes when diagnosing the P0203 code

Commonly, mistakes are made when steps are not followed or entire systems are non tested. To avert wasting time and money just to not prepare the mistake, all steps should be followed in the proper gild. Usually the injector is the cause for P0203, but it must exist tested before it is replaced.

How serious is the P0203 code?

With P0203, if the vehicle is running poorly and is having trouble staying running, then this is a serious status which calls for the vehicle not to be driven, and the code to be repaired as soon as possible. In much less serious cases, the only felt symptom is the Check Engine Calorie-free beingness turned on.

What repairs can fix the P0203 lawmaking?

Repair or replacement of wiring harness
Cylinder three injector replacement
ECM replacement
Connection issues fixed

Specialty tools may be needed to properly diagnose P0203, such as an advanced browse tool. These advanced scan tools let technicians view much more than information than just the lawmaking, such as live action data and the ability to view injector operation data.

Another tool that may be needed is a noid light ready. These are tools that give the technician more than data than just if voltage is present. When diagnosing injectors, an important aspect is the pulse of voltage that operates the injector. Noid lights are used to determine proper pulse fourth dimension.

Need help with a P0203 code?

YourMechanic offers certified mobile mechanics who will come to your home or role to diagnose and repair your vehicle. Get a quote and book an appointment online or speak to a service advisor at ane-800-701-6230.

Check Engine Low-cal

P0203

problem codes